基于ARM7的自行火炮火控系统测控平台研究

自行火炮是当今世界各国地面压制火力的重点装备,火控系统作为自行火炮的重要组成部分,对于火炮的远程射击和精确命中至关重要;当前,专用维修检测设备的缺乏给自行火炮火控系统的装备保障带来较大困难;在对部队装备维修的实际需要、装备维修的特点以及基于ARM7的嵌入式系统等进行深入分析研究的基础上,设计了一套基于ARM7的自行火炮火控系统综合测控平台;平台集测试与控制、故障诊断和专家系统、远程支援、信息管理于一体,为装备使用和维修人员实施快速、高效的保障提供了很好的硬件和软件环境;使用表明,测控平台提高了装备保障的效益和效率。     

基于物理模型的烟雾模拟

在分析研究流体物理特性算法基础上,提出一种新的烟雾模拟实现方法。该方法基于物理模型的求解简化方程模拟烟雾的动态变化过程。模型中采用了非粘性欧拉方程,通常它比其他用粘性Navier-Stoke方程建模的更适合用来对气体进行建模并且减少计算量。实验验证该模型还可以正确处理烟雾与移动的物体之间的相互作用。     

图像检索中语义映射方法综述

"语义鸿沟"已成为基于内容图像检索的瓶颈,解决这个问题需要建立从图像的低层特征到高层语义的映射.对当前语义映射研究进行了综述,首先给出一个结合语义的图像检索框架,并分析了图像内容的层次模型及图像语义的表示方法;然后根据算法的特点,将现有的语义映射方法和技术分为4大类,重点阐述了各类方法提出的思路、模型.并讨论各自的优势和局限性;最后以图像检索实际应用的需要为依据,提出在图像语义检索相关领域的重要课题和研究方向.     

Eigenvalue analysis of size effect for cohesive crack model

The paper analyses the effect of structure size on the nominal strength of the structure that is implied by the cohesive (or fictitious) crack model proposed for concrete by Hillerborg et al. A new method to calculate the maximum load of geometrically similar structures of different sizes without calculating the entire load-deflection curves is presented. The problem is reduced to a matrix eigenvalue problem, in which the structure size for which the maximum load occurs at the given (relative) length of the cohesive crack is obtained as the smallest eigenvalue. Subsequently, the maximum load, nominal strength and load-point displacement are calculated from the matrix equilibrium equation. The nonlinearity of the softening stress-displacement law is handled by iteration. For a linear softening law, the eigenvalue problem is linear and independent of the matrix equilibrium equation, and the peak load can then be obtained without solving the equilibrium equation. The effect of the shape of the softening law is studied, and it is found that the size effect curve is not very sensitive to it. The generalized size effect law proposed earlier by Baant, which describes a transition between the horizontal and inclined asymptotes of strength theory and linear elastic fracture mechanics, is found to fit the numerical results very well. Finally some implications for the determination of fracture energy from the size effect tests are discussed. The results are of interest for quasibrittle materials such as concrete, rocks, sea ice and modern tough ceramics.     

Objective meat quality measurements of ham: A practical classification method on the slaughterline

Meat quality is one of the principal problems in Spanish dry cured ham productuon. At the experimental level, there are well developed objective instrumental measurements which can be made on the slaughterline and then, by applying the correct statistical treatment, these measurements can be used to classify hams with an acceptable degree of accuracy. These treatments, however, are not easy to apply in the industry.

In this work, 312 pork carcasses were tested at three industrial abbatoirs. Ham meat quality was determined by internal light scattering (FOP), electrical conductivity (EC) and pH measurements in Semimembranosus (SM) muscle at 45 min and 24 h post mortem. The results obtained were: 21 (6.7%) DFD; 168 (53.9%) slightly DFD; 104 (33.3%) normal; 11 (3.5%) slightly PSE; and 8 (2.6%) PSE.

A simplified method has been developed for classifying hams into quality categories, by deriving a theoretical quality value (Q) based on a simple statistical treatment of values for FOP, EC and pH. The multiple linear regression coefficient of Q was R² = 0.85 (P<0.001) with respect to the experimental variables.     

Creep and shrinkage prediction model for analysis and design of concrete structures— model B3

RILEM Draft Recommendation107-GCS Guidelines for the Formulation of Creep and Shrinkage Prediction Models

Creep and shrinkage prediction model for analysis and design of concrete structures— model B₃     

基于I-DPWM的三电平中点钳位光伏逆变器漏电流抑制方法

对于三电平中点钳位光伏逆变器,基于断续脉宽调制(discontinuous pulse width modulation, DPWM)并通过选择特定矢量进行钳位控制的方法,存在矢量分解计算时间长、注入共模电压分量和漏电流过大等不足。对此,提出了一种基于I-DPWM的三电平中点钳位光伏逆变器漏电流抑制方法。通过计算各类DPWM等效调制波来解析注入的低频共模电压分量。针对低频共模电压分量最小的DPWM1,在低频共模电压不连续点注入新的零序分量,通过减小低频共模电压来抑制漏电流幅值。同时,采用载波实现DPWM,免去了复杂的矢量运算。最后,在Matlab/Simulink平台建立了20 kW三电平中点钳位光伏逆变器的仿真模型,同时结合所设计的125 W实验样机验证了所提方法的有效性。     

A Fullerene Seeded Strategy for Facile Construction of Nitrogen-Doped Carbon Nano-Onions as Robust Electrocatalysts

Carbon nano-onions (CNOs) as a novel form of carbon materials hold peculiar structural features but their electrocatalytic applications are largely discouraged by the demanding synthesis conditions (e.g., ≥1500 °C and vacuum). Using C₆₀ fullerene molecules as the sacrificial seeds and melamine as the main feedstock, herein, a novel strategy for the facile construction of CNOs nanoparticles is presented with ultrafine sizes (≈5 nm) at relatively low temperatures (≤900 °C) and atmospheric pressure. During the calcination, in-depth characterizations reveal that C₆₀ can retain the melamine-derived graphitic carbon nitride from complete sublimation at high temperatures (≥700 °C). Owing to the N removal and subsequent pentagon generation, severely deformed graphitic fragments together with the disintegrated C₆₀ molecules merge into larger sized nanosheets with high curvature, eventually leading to the formation of N-doped defect-rich CNOs. Owing to the integration of multiple favorable structural features of pentagons, edges, and N dopants, the CNOs obtained at 900 °C present superior oxygen reduction half-wave potential (0.853 V_RHE) and zinc–air cathode performance to the commercial Pt/C (0.838 V_RHE). Density functional theory calculation further uncovers that the carbon atoms adjacent to the N-doped edged pentagons are turned into the ORR-active sites with O₂ protonation as the rate-determining step.     

考虑负荷多无功用电场景的城市配电网无功优化配置

高比例电力电子设备与高比例分布式光伏的广泛接入以及城市电缆化率的提升,使配电网用户侧的无功特性变得复杂,导致负荷无功用电不确定性增加,不利于配电网安全运行。因此,为了更好地进行无功优化配置,文章采用不同负荷日功率因数变化曲线的组合场景及其概率来反映无功用电的不确定性,以运行成本的期望值最小为目标,建立多无功用电场景的期望值优化配置模型。首先,利用多重一维卷积自编码器(one-dimensional convolutional autoencoders,1D-CAEs)提取不同用户日功率因数数据的低维表征;随后,利用k-means方法进行场景缩减,获得典型日功率因数变化场景,并组合出多用户的场景集;最后,建立期望值无功优化模型,采用粒子群算法求解,确定出最优配置方案。依据上海市某配电网不同类型用户实际的无功用电信息,采用改进的IEEE 33节点系统进行仿真,以验证所提方法的有效性。     

考虑储能备用的电动汽车负荷连续追踪弃风曲线优化模型

在大力推动高比例可再生能源并网的背景下,风电的强随机波动特征导致的大量弃风问题给电力系统的经济可靠运行带来了挑战,而电动汽车、储能等作为需求侧的灵活性资源参与曲线追踪交易为弃风问题带来了解决方案。首先,分析了电动汽车消纳风电的可行性;然后,对电动汽车聚合负荷消纳风电的交易模式进行了梳理,聚焦连续曲线追踪交易,在充分考虑电动汽车聚合的物理经济约束下建立了混合整数线性规划模型以求解聚合调用方案。由于电动汽车的移动储能能力与追踪效果有限,引入储能系统进行联合优化,采用逐步搜索法在降低聚合成本的同时,得到储能的最优容量与功率配置以及同时优化物理弃风电量与经济成本的聚合方案。算例分析结果表明：考虑储能备用的聚合方法能够提高风电曲线的追踪精度,减小聚合成本,验证了所建模型在连续曲线追踪中的可行性与适用性,可为曲线追踪交易市场的完善与新型电力系统的建设提供借鉴。